Residential · San Jose, CA
A solid asphalt apron protects the transition between your street and driveway, keeping vehicles from breaking edges and tracking loose aggregate. Apex Asphalt San Jose has served San Jose since 2018, installing and repairing asphalt aprons for homes, HOAs, and commercial entrances with clean tie-ins and proper base support.
Apron performance starts below the mat. We sawcut and remove failed asphalt, then excavate to sound subgrade and correct soft spots before placing a compacted aggregate base (Class 2 AB) in controlled lifts. The base is graded for positive drainage and compacted with a vibratory plate compactor or small roller to reduce future settling, then we apply a tack coat (SS-1h/RS-1) on all contact edges for a bonded joint. Where the apron meets concrete curb, sidewalk, or garage approaches, we keep edges straight, clean, and properly keyed so the asphalt can lock in without unraveling.
San Jose heat cycles, occasional heavy rain, and turning tires at the curb cut all punish the apron area. We design the apron thickness and cross-slope for the traffic it will see, and we protect the edge with tight compaction and clean transitions to the existing driveway and gutter line. For repairs, we match the existing grades and correct the lip that causes scraping or ponding, then compact and seal seams to slow water intrusion. Finish options include a tight, roller-compacted surface with hand-tooled edges, and when needed we add a sanded sealcoat later to help resist oxidation and raveling.
Customers choose Apex Asphalt San Jose because we treat the apron as structural work, not a cosmetic patch. You get clear recommendations on remove-and-replace versus sawcut and patch, plus a written scope that spells out base depth, asphalt thickness, and tie-in locations. Our crews use commercial paving equipment, proper joint preparation, and measured compaction so the apron supports turning movements and delivery traffic. We are licensed and insured, and we keep the jobsite organized so entrances stay as accessible and safe as possible.
Before we wrap up, we walk the work with you and verify drainage, transitions, and seam locations. You receive a clear outline of cure time, when to drive on the new apron, and how to prevent scuffing from tight turns in the first few days. We also note maintenance steps, including crack sealing, seam sealing, and when sealcoating makes sense based on sun exposure and traffic. The result is an asphalt apron that ties in cleanly, sheds water, and protects the edge of your driveway for the long term.
Yes. We provide a free written estimate that lists the recommended scope, measured quantities, and the materials and steps included.
Yes. We regularly transition asphalt to garage slabs, sidewalks, and existing concrete, using clean sawcut edges where needed and proper compaction at the joint to reduce separation.
Repair scope depends on the failure, but may include sawcut and removal, base rebuild with aggregate, compaction, hot mix placement, and edge sealing. We can also add crack sealing and sealcoating where appropriate.
Yes. We stripe stalls, arrows, fire lanes, and accessible markings, and we can coordinate layouts for re-striping after paving or sealcoating.
Yes. For active businesses, we can phase paving or resurfacing, set cure windows, and plan access routes to reduce downtime.
An asphalt apron is the high-stress section where your driveway meets the street, and it takes the brunt of braking, turning, and water runoff. If that area is cracking, sinking, or breaking apart, a targeted apron repair can restore a smooth entry and stop edge deterioration from spreading into the driveway. Apex Asphalt San Jose installs new asphalt aprons and performs cut-out repairs designed around proper base support, drainage, and durable joint bonding for residential and commercial properties.
Most apron failures start with water and movement. When runoff gets under the edge, the base softens, the asphalt flexes, and cracks open at the seam. We address the cause by excavating to firm subgrade, rebuilding the aggregate base in lifts, and compacting to a stable platform before paving. For small failures, we can sawcut and patch with hot-mix asphalt, seal the seams, and blend the surface to the existing driveway. For widespread breakup or poor grades, remove-and-replace delivers a longer-lasting result and a cleaner transition.
A good asphalt apron also needs the right shape. We set cross-slope to move water away from the driveway surface and maintain a smooth transition at the gutter line to reduce tire impact. Our crews focus on tight compaction at edges, correct mat thickness, and clean handwork around concrete, curbs, and utility features. If you are planning a full driveway replacement, adding a new apron at the same time is often the most cost-effective way to improve entry, protect the driveway edge, and reduce future patching.
If you need asphalt apron installation or asphalt apron repair in San Jose, we will measure grades, review the existing base condition, and provide a free written estimate with options. You will know what is being removed, what base materials are being installed, how the joints are treated, and what cure time to expect. The goal is simple: a smooth, durable entry that holds up to daily traffic and seasonal weather.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in San Jose. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
